Square Mosaic Tiles
1 Product parameter Our mosaic wall tile is a very decorative decoration material for outdoor designs and indoor designs. It widely used to decorate of living room, sleeping room, study, toilet, kitchen, swimming pool and other household premises. It widely used to various business...
1 Product parameter
Our mosaic wall tile is a very decorative decoration material for outdoor designs and indoor designs. It widely used to decorate of living room, sleeping room, study, toilet, kitchen, swimming pool and other household premises. It widely used to various business establishments, for example hotel, market, KTV etc.
1) Beautiful, glass tile perfect for interior and exterior in residential and commercial locations: Kitchen Backsplash, fireplaces, showers, bathrooms, swimming pool tile, floor tile, wall, etc.
2) Can be applied as complete sheets or in small sections to decorative borders or trims with other tiles surfaces
3) Frost-proof, acid-resistant, Water-proof, hot-resistant and easy to clean
4) Resistant to fading, staining and discoloration, Anti-oxidation and antacid
2 .Ceramic Mosaic tile series
MD001T MD007T MD012T
MD018T MD032T MD061T
ceramic mosaic tile is decorative materials. Mosaic ties are good for
people's health and widely used in villas, yard buildings, holiday
villages and other public buildings.
3. How to lay the interior mosaic tile
The decorative effect of the mosaic is very good, and the materials are various, suitable for different shapes covered by different regions; many people are very fond of mosaics, but what are the techniques when laying mosaics for our homes?
First, how to lay a mosaic - brush glue
First apply the glue on the wall, then apply the glue with a smooth plastering knife until it is even. The thickness of the glue is about 20mm.
Second, how to lay a mosaic - tiling
After brushing the glue, spread the mosaic according to the drawings and align the gaps. Use a plastering knife or a putty shovel to close the mosaic, or use a flat thick plank to pad the mosaic surface and evenly beat with a rubber hammer to ensure a firm paste.
Third, how to lay a mosaic - check the paving situation
The gap between the brick and the brick must be determined to be a uniform width, so that the small gray shovel is used to adjust the gray joint. This is a process that requires the most patience in the process of laying the mosaic, but the process of laying the work is The most important link
Fourth, how to lay a mosaic - joint
After the inspection is completed, wait for the moisture to be properly dried and have the initial strength. Start the jointing, prepare the required caulking agent, and use the plastering knife to pour the grout into the mosaic gap. Note that the scraping area does not exceed each time. 2 square meters. The grout is evenly applied to the mosaic surface to ensure that all the ash seams are completely filled and there is no excess residue.