Home > Knowledge > Content
Cleaning and maintenance of tiles after renovation
- Jul 04, 2018 -

If the tile is decorated without paying attention to the protection, the surface will leave a lot of stubborn stains such as cement scale, scratches, etc. It is very difficult to clean, and the ordinary detergent does not work at all for these stubborn stains. If it is not cleaned properly, it will have serious consequences: some people use hydrochloric acid and oxalic acid to clean it. The result is not only obvious, but also the brick surface is seriously corroded. Some people use tools such as shovel, and the brick surface is difficult to repair. Scratches, and finally had to replace the tiles.
 Whether it's polished tiles or antique tiles, you can easily remove them with the right cleaning agents and methods.
1. The ordinary dust on the tile surface can be cleaned with detergent, soap, washing powder, etc.
2, the wax layer of the polished brick factory, can be removed with the shield king full effect decontamination king.
3, the residual cement scale, caulking agent, lime, putty powder and other dirt on the tile surface, can be removed with the shield king descaling king.
4, paint, paint and other contaminants use chemical solvents to dissolve and remove, such as Tianna water, etc., can also be used paint remover, such as Sanhe.
5, black metal scratches, electric welding, etc. can be removed with the shield king descaling king
6, glue hammer printing, protection material prints, shoe prints, watermarks, adhesive stains, grease stains, big head pen prints, etc. can be removed with the shield king full effect decontamination king
7, all kinds of glue can be removed with banana water, pure banana water is colorless, transparent and volatile liquid, has a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as spray paint Solvent and thinner.
8, rust, lime scale, gaps and stains in the recesses of antique bricks, can be removed with the shield king descaling king
9, tea stains, cigarette butts, drink stains and other stains can be removed with the shield king decontamination king.
10, the floor tiles will form a layer of dirt for a long time, the surface looks black, this stain is more stubborn, you can use the full-effect decontamination king to clear.
11. The fine pores on the surface of the polished brick are exposed. It is easy to absorb the dirt after a long time, making the polished brick difficult to clean, tarnishing, and getting old. It should be waxed regularly. The interval is 2-3 months.

timg.jpgu=3664443938,2501548175&fm=27&gp=0.jpg

u=4006190254,1414508042&fm=27&gp=0.jpg

Copyright © Foshan Hanse Industrial Co.,Ltd All Rights Reserved.