Home > Knowledge > Content
Characteristics of glazed tiles
- May 08, 2018 -

Glazed tile is a kind of special formula glaze which can be used in the glaze polishing process. It is the last glaze applied to the antique tile. It is usually transparent surface glaze or transparent convex flower glaze. The glaze cast glaze tile has the advantages of the polishing tile and the antique tile. The glaze is as smooth and bright as the polishing tile, and the glazed flower is at the same time. The colors are like antique tile, with rich patterns and brilliant colors. Such
Characteristics of glaze tile.
Hardness of embryo body: high temperature firing, low hardness; water absorption rate: less than 0.5%;
The whole cast glaze consists of two times firing of the bottom and the surface glaze, and the bottom embryo is calcined at 1250 degree calcination.
Full cast glaze is completely unrestricted, red, black, yellow, blue and blue have no problem; the full glaze can be made of fine lines like needle thread; there is only a very thin layer of color on the surface of the tile.
Scope of application:
It is not only suitable for high-grade sites, but also acceptable for ordinary household living space, with low maintenance cost. Suitable area: ground, wall, mesa, cylinder and so on. Suitable places: hall, lobby, bedroom, study room, etc. Such
Wear-resistant and anti fouling: the glazed layer of all glazed tiles is more wearable and antifouling than Microcrystalline stone. It
Long service life: General polished tiles are used for a long time, easy to matte; antique tiles have been used for a long time, as the glaze on the surface is thin and easy to wear. Glazed tiles fired by all glazed tiles are thick and not easy to wear, so their service life is 3 times that of ordinary fine tiles. Such
Defect of glazing tile
The glazed tile is a glaze on the surface of polished tiles. Compared with that, the brightness is good and the penetration is good, but the wear resistance is not as good as that of polished tiles. The surface of polished tiles is very thick and relatively wear-resistant, while the glazed tile surface is glazed, very thin, and wear-resisting is not so strong.


Copyright © Foshan Hanse Industrial Co.,Ltd All Rights Reserved.